A bag-on-valve can contains two separate spaces: the product inside a sealed bag, and the propellant outside that bag but inside the body. Everything the format is known for follows from that. It also means the bag is not packaging around the product, it is the container the product actually sits in.
That is why the bag has to be specified, not assumed. This page covers the eight sizes we make from the component side. For how the format works and when it is worth the cost, see our BOV explainer.
The bag is the fill, so the fill decides the bag
| Fill volume | Bag The bag capacity is the figure the fill is planned around |
|---|---|
| Body and opening | Can body The body sets the space the bag has to fill; the opening is the standard 1 inch (25.4 mm) |
| Discharge character | Valve and actuator Supplied as one set with the bag so the assembly is tested together |
| Propellant contact | The format itself The propellant stays outside the bag, so it never meets the product |
| Orientation in use | The format itself Because the product is in the bag, the can works in any orientation |
The practical error to avoid is choosing the body first and treating the bag as whatever fits inside it. On a BOV format the bag is the part the product sits in, so the fill volume leads and the body follows.
The eight sizes, with their bags
| 30 ml | Φ35 × 90 mm body 60 × 65 × 25 mm bag |
|---|---|
| 50 ml | Φ35 × 110 mm body 90 × 65 × 25 mm bag |
| 80 ml | Φ40 × 120 mm body 100 × 80 × 25 mm bag |
| 100 ml | Φ45 × 125 mm body 100 × 90 × 25 mm bag |
| 125 ml | Φ45 × 150 mm body 125 × 90 × 25 mm bag |
| 200 ml | Φ53 × 180 mm body 145 × 100 × 32 mm bag |
| 300 ml | Φ59 × 215 mm body 180 × 100 × 32 mm bag |
| 500 ml | Φ66 × 240 mm body 213 × 115 × 35 mm bag |
Each is supplied as a matched set: the body, the bag, the valve and the actuator together, so the assembly is one specification rather than four parts that have to be made to agree later. That is the same reason the components are matched on every other format in this blog.
Where BOV earns its cost, and where it does not
- Product separation. When the formulation should not meet the propellant, the bag is what makes that possible. This is the reason sun care and food formats are often specified this way; see the sunscreen actuator article.
- Any orientation. Because the product travels in the bag rather than as a liquid pool, the can works upside down, which matters for a body product or a can used in a confined space.
- Where it does not help. A conventional aerosol is simpler and cheaper, and if the formulation is compatible with the propellant and the can does not need to work in any orientation, BOV adds cost without adding anything. The BOV explainer works through those cases.
Frequently asked questions
What does the bag hold, and where does the propellant go?
The bag is the sealed inner container that the product is filled into, and the propellant sits outside it but inside the can. That arrangement is what a bag-on-valve format is: the product never meets the propellant. Because the product is contained in the bag, the bag capacity is the figure that decides the fill.
How do I choose between the eight sizes?
Start from the fill volume, not from the can. The eight bodies we make carry bags from 30 ml to 500 ml, and the bag dimensions are matched to the body so that the bag fills the available space without over-stretching. Send us the fill volume and we will confirm the pair.
Is the bag the same across the sizes?
No. The bag dimensions change with the body: the 30 ml and 50 ml sizes use a 60 x 65 x 25 mm and a 90 x 65 x 25 mm bag respectively, while the 500 ml size uses a 213 x 115 x 35 mm bag in a 66 x 240 mm body. The bag, the valve and the body are supplied as one matched set for this reason.
How is this different from your other BOV article?
The other article explains how the format works and when it is worth the extra cost. This page is the component view: the bag itself, the sizes, and how the bag is matched to the body and valve. If you have not yet decided whether BOV suits your product, read how BOV works first.
Do you supply the valve and the actuator with the bag?
Yes. The bag, the valve and the actuator are supplied as a matched set with the body, on the standard 1-inch (25.4 mm) opening. Printing is done in-house by offset lithography and colour-matched against your approved Pantone reference. Free blank samples are available, and the standard minimum order quantity is 10,000 pieces per size and design.
Next step
Send us the fill volume and the formulation, and we will come back with the body and bag pair that fits it, with free blank samples so you can test the discharge. The eight sets are listed under bag-on-valve cans, and the bodies themselves start at the 30 ml BOV can. Or contact us directly.