A nasal or medical spray is judged almost entirely by what leaves the container. The dose has to repeat, the plume has to land where it is aimed, and the force needed to fire it has to suit the user. None of that is set by the can. It is set by the valve and the actuator on top of it, which is why the component drawing matters more here than on any other aerosol format.
This page is written from the component side: what the actuator and valve actually decide, how to specify them, and the boundary we hold to on medical formats.
What the actuator and valve decide
| Dose per actuation | Valve and actuator Set by the valve metering chamber and the actuator stroke, not by the can |
|---|---|
| Plume or stream | Actuator The insert geometry inside the actuator shapes the plume; it is chosen with the valve |
| Insertion and aim | Actuator A nasal actuator adds a nosepiece that sets how far the nozzle enters and at what angle |
| Force per press | Valve and actuator together Set by the spring and the metering chamber pressure |
| Volume carried | Can body The body sets how much you can carry; it does not change the dose |
The practical consequence is that a nasal or medical format should be specified from the valve and actuator outwards. Choosing the body first, and then looking for a component to fit it, is the route that ends with a spray character nobody approved.
Where the boundary sits on medical formats
- We supply the packaging and its components. The aluminium body, valve, actuator and cap come from us as a matched set, built on the standard 1-inch (25.4 mm) opening.
- The brand owns the product and its authorisation. The formulation, the filling, the claims and the marketing authorisation for a medicinal product are the brand's responsibility, in its own market. We do not formulate and we do not file.
- The documentation we can provide is packaging documentation. Our material and coating reports, and the dimensional and pressure checks that come with each batch, describe the container. See how to read our test reports for the plain account of what each document does and does not cover.
- Anything beyond that is set by the brand's regulatory path. If a market requires a particular extraction or biocompatibility package, that requirement comes from the authorisation, and we can tell you what the packaging uses so the assessment can be made.
What to settle before asking for a quote
- Fill volume and propellant. The body is confirmed against these, not chosen from a list.
- Dose and dose count. The two numbers that fix the valve and actuator pair.
- Plume or stream, and the nosepiece geometry if the format is nasal.
- Coating requirement. Whether the internal lacquer has to suit a product in prolonged contact, and which market's documentation you need for it.
- Cap and tamper arrangement. What keeps the actuator clean and unactuated in transit, and whether the format needs a secondary pack.
Frequently asked questions
Do you make the nasal spray itself?
No. We supply the container and its components — the aluminium can body, the valve, the actuator and the cap. The formulation, the filling and the marketing authorisation for a medicinal product belong to the brand that sells it. What we can do is supply the packaging consistently to the specification you approve and document what it is made of.
Which opening is used for nasal formats?
The components in this range are built on the same 1-inch (25.4 mm) crimp opening used across our aluminium aerosol cans, which is what makes the actuator, valve and body available as one matched set rather than three parts sourced separately.
Can you supply a metered dose?
Metered delivery is a property of the valve and actuator combination, not of the can. Tell us the dose per actuation and the number of doses, and we will confirm which valve and actuator pair is used for that specification and how it is verified.
What sizes can a nasal or oral format use?
The small sizes in this range start at 15 ml, which is the size we make for oral spray and mouth mist. The body that suits your product depends on the fill volume and the propellant; send the fill volume and we will confirm the body against it rather than quote a size first.
Do you provide samples before an order?
Yes. Free blank samples are available so you can test the actuator and the discharge against your own formulation. Our standard minimum order quantity is 10,000 pieces per size and design; smaller trial quantities can be discussed for a first production run.
Next step
Send us the fill volume, the dose and the nosepiece or plume you need, and we will come back with the valve and actuator pair that fits, plus free blank samples so you can test the discharge against your own formulation. You can also see the components we supply under components and accessories, read how the crimp opening constrains the valve, or contact us directly.